Honeywell CC-PAIX01 16-Channel Non-HART High Level Analog Input Module
- Product Code: CC-PAIX01
- Availability: In Stock
Purchase Attributes：Original, Brand New
Service Attributes
▷ Stock & Logistics：Fast Delivery
▷ After-sales Guarantee：12 Months Warranty
▷ Online Customer Service：24 Hours Online Support
▷ Product Advantages：Competitive Price, Long Service Life
Application Attributes：Honeywell CC-PAIX01 16-Channel Non-HART High Level Analog Input Module
Honeywell CC-PAIX01 16-Channel Non-HART High Level Analog Input Module
Manufacturer: Honeywell Process Solutions
Model: CC-PAIX01 (P/N:51405038-175)
Series: Experion PKS C300 Series C I/O System
Type: 16-channel simplex high level analog input IOM, no HART support
Function: Collect 4–20mA two-wire conventional transmitter signals; convert analog field values to high-precision digital data for C300 controller process calculation; no HART digital communication function
1. Overview
CC-PAIX01 is a 16-channel non-HART high-density analog input module for Honeywell Experion PKS C300 DCS, early generation HLAI card before CC-PAIN01. It only supports standard 4–20mA two-wire transmitters without HART protocol, all channels single-ended wiring design, no differential mode. Matched IOTA terminal base: CC-TAIN01 (non-redundant simplex base). It adopts 1500V channel-to-backplane galvanic isolation, built-in RC anti-interference filter, hot-swap online maintenance and G3 conformal coating. Cost-effective for mass conventional analog transmitters without smart HART diagnosis demand, widely used in power, petrochemical, oil & gas and water treatment general process monitoring loops.
2. Technical Specifications
• Power Supply: 24 VDC ±10%, typical power consumption 2.2W
• Channel Configuration: 16 fully single-ended channels, differential input unsupported
• Supported Signal: Only 4–20mA two-wire transmitter signal
• HART Support: None, pure analog signal acquisition only
• ADC Resolution: 16-bit high precision analog-to-digital conversion
• Static Accuracy: ±0.075% FS at 25°C, ±0.15% FS full temperature range
• CMRR: 120dB minimum at 50/60Hz industrial frequency
• Filter Characteristic: Single-pole RC filter, -3dB @6.5Hz
• Galvanic Isolation: 1500V RMS channel-to-backplane isolation
• Built-in Diagnostics: Wire break, short circuit, over-range fault detection with LED status indication
• Scan Cycle: Fixed 50ms channel scan period
• Operating Temperature: -20°C ~ +55°C standard; -40°C ~ +70°C extended coated version
• Storage Temperature: -40°C ~ +85°C
• Humidity: 5%~95% RH non-condensing
• Dimensions: 142 mm × 82 mm × 54 mm
• Weight: Approx. 0.36 kg
• Coating: G3 conformal coating for corrosive, damp industrial cabinets
• Feature: Hot-swappable, compatible with simplex C300 controller architecture
• Matching IOTA: CC-TAIN01 (6-inch non-redundant termination base)
• Certifications: CE, UL, CSA, Class 1 Div 2 hazardous area certified
3. Key Features
• 16 High-Density Single-Ended Non-HART Channels Maximize cabinet space for mass conventional 4-20mA transmitter centralized collection
• No HART Modem Design Lower hardware cost for sites without smart instrument remote calibration requirements
• 16-bit High Precision Conversion & Low Temperature Drift Stable measurement accuracy for long-term continuous process operation
• High CMRR Anti-Interference Circuit Effectively suppress 50/60Hz power frequency common-mode noise in factory environments
• Comprehensive Channel Self-Diagnosis Real-time LED fault alarm for open wire, short circuit and signal out-of-limit
• Hot-Swap Online Maintenance Design Replace module without disconnecting field instrument cables or stopping control loops
• G3 Conformal Coating Protection Resist dust, moisture and corrosive gas in harsh plant cabinet environments
• Dedicated Simplex IOTA Matching Works with CC-TAIN01 single termination base for cost-effective non-redundant control cabinets
4. Applications
• Thermal & Combined Cycle Power Plant conventional pressure/temperature/flow transmitter centralized signal acquisition
• Refinery & Petrochemical plant full-process non-HART analog instrument monitoring
• Oil & Gas pipeline and compressor station mass conventional process variable measurement
• Large water treatment and metallurgy continuous process multi-point analog parameter collection
Honeywell © CC-PAIX01 16-Channel Non-HART High Level Analog Input Module